After re-sharpening a couple of dozen 118- and 135-degree drill bits, I'm generally impressed with the results. Grinds are symetrical, bits cut evenly on both faces, holes have minimal "wobble". The included instructions are pretty useless -- you'll need watch a YT video to get up to speed. The collet collection covers 1/8 - 1/2" bits. Collets are ER-20 and ER-25 style. Dialing-in the bit-diameter (web-diameter) is pretty low-precision -- the alignment arrow is an inch away from the dial. My biggest complaint is safety-related: while grinding the point angle on the side port, the abrasive wheel is visible in the top port and it's pretty hard to find a position that's out of the "line-of-fire". Eye/face protection is a must, and the same goes for respirator masks. The collet storage is okay (unless you transport the sharpener 'cuz all the collets will fall out of their retainer holes) but there's no place to put the workholder, kind of a big oversight IMO. All that aside, the unit consistently delivers sharp, well-formed drill bits, which, if you'll excuse the pun, is the whole point.