Specifications:Voltage: 110V, 0.1APower: 65WRotating speed: 4200r/minWorking table size: 165x165 mmMachine size: 195x195x160 mmMachine weight: 2kgColor: RedFeatures:1. Mini size and easy to carry2. Stable and reliable performance3. Automatic water available for some sizes(5/8” 1”) 4. New design switch avoid electronic conduction5. Glass, ceramics, such as grinding hard brittle materials6. Grinding variety of geometric shapes: plane, curve, rounded corners, slope, etc.Grinding wheel installation:1. Before installation of grinding wheel, topped with lubricant, engine shaft grinding wheels need to apply a layer of lubricant inside.2. The grinding wheel mounted to the engine shaft, the fixed screw position higher than the engine shaft. The position of the grinding wheel on the axle must be at least 1/8" diamond part above the operating table.3. Fixed grinding wheel on the shaft with hexagonal wrench clockwisely. Installation Note: Maintain stability of the grinding wheel installed in the engine shaft of the plane.Operation Note:1. Can not grinding without water. Ensure the grinding wheel is wet2. When using the grinding wheel, with small strength , don't use too much strength.Too much strength will reduce grinding machine and the service life of the grinding wheel.3. After usement, clean the water reservoir. Remove the reservoir, clean up the rest of the residue after grinding.4. In order to prolong the service life of grinding machine, cleaning and add lubricant to the engine shaft, 25 hours after each use, remove all the grinding wheel and the fixed screw.5. If the grinding wheel not be used for a week or longer,it need to grind down on stage to prevent the direct a